CAD data and simulation results for a study on operating parameters in multi-material microreactors

Description

This data set contains the CAD files of a multi-material microchannel reactor for ammonia decomposition. The design is intended for additive manufacturing on an Aconity MIDI+ equipped with an Aerosint Selective Powder Deposition Recoater V1.0 (or similar machines). The CAD data is available in manufacturer-neutral .step file format. CFD simulations were performed in Ansys Fluent using this design. The raw data from these simulations are included in this data set in neutral .csv format.

References

The research data was used in the following publication: Reference including DOI will be added after publication.

Acknowledgements

This work is part of the project “Additive Fertigung multimaterieller Komponenten zur nachhaltigen Energiewandlung”, which was funded by the European Regional Development Fund (ERDF) and the state of Lower Saxony – Project number ZW 7–87011865.

Data and Resources

Cite this as

Lennart Mesecke, Roland Lachmayer (2026). CAD data and simulation results for a study on operating parameters in multi-material microreactors [Data set]. LUIS. https://doi.org/10.25835/xhymgaua
Retrieved: 05:56 15 Sep 2026 (UTC)

Additional Info

Field Value
Author Lennart Mesecke, Roland Lachmayer
Maintainer Lennart Mesecke
Last Updated September 14, 2026, 12:12 (UTC)
Created September 14, 2026, 12:11 (UTC)
License Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
Dataset Size 254.0 KByte
01_ORCID Lennart Mesecke (ORCID 0009-0009-0919-5362), Roland Lachmayer (0000-0002-3181-6323)
02_Funder European Regional Development Fund (ERDF)
03_Project Name Additive Fertigung multimaterieller Komponenten zur nachhaltigen Energiewandlung (AM2H2)
04_Project Number ZW 7–87011865